A piece of equipment besides a drain snake is used to clear objects from your plumbing system. It’s called hydro jetting. It is anything but DIY equipment. If you want to operate it to its fullest, you need to comprehend a few things. This article will go through things you should remember about hydro jetting.
What exactly is hydro jetting?
Hydro jetting is a technology that utilizes highly-pressurized water to break debris, sludge, grease, and other objects in your plumbing network into pieces and remove them altogether. The force from hydro jetting is much stronger than normal garden hoses and can pump out a pressure of up to 4000 PSI.
How does hydro jetting work?
The cool thing about hydro jetting is that it just uses water. No chemical is involved in this technology. Parts of a hydro jetting set up are as follow:
Water pressure machine.
The process of cleaning clogs with hydro jetting usually starts from the system’s lower end. The nozzle will get in first to identify debris and clogs. Water will shoot from the front and rear when it encounters foreign objects. Holes are created using the front and rear jet washes the debris back.
Hydro jetting isn’t for any plumbing system
You can’t just buy a hydro jetting setup and run it through your plumbing. You need to perform a thorough checkup to see if your system is qualified for hydro jetting. The sheer force from the hydro jetting will damage an entire weak plumbing network if you’re not careful.
Old or obsolete pipes can't withstand the force from hydro jetting
If examining the pipes proves to be too much of a challenge, you can ask a professional or a contractor to do that for you. We can also help you handle the task, so give us a call if you are in San Jose.
Advantages of hydro jetting
There are many upsides to this technology. Given that your plumbing is adequate for it, hydro jetting can provide you with benefits such as:
a. It cleans your network with ease
Even the most persistent clog will be handled by hydro jetting effortlessly. Anything from grease to tree roots is no match for this plumbing technology. Even smaller tree roots, which are hard to remove, can be washed away using hydro jetting.
b. No digging required
You don’t need to dig into your system to perform hydro jetting. The access to the network is done through something called the sewer cleanout. It’s the pipe that rises above the ground in your garden. Don’t mistake it for the plumbing vent.
c. No harm to the environment
This fella doesn’t use any chemicals, so you can rest assured that it won’t harm the environment. Pressurized water is all it needs.
d. It’s safe to use
Using only water also makes hydro jetting less harmful to your plumbing.
e. It can clean more thoroughly
Compared to a drain snake, hydro jetting can clean your pipes much more efficiently since it does more than create holes for water to flow through. The equipment can wash all the blockage away.
Disadvantages when using hydro jetting
This technology also resides some noticeable drawbacks you should look out for, such as:
a. It will damage old pipes
The force of 4000 PSI pressured upon old or frail pipes will cause damage, or even break them. If that happens, you’re gonna have a much harder problem to fix, which usually costs you more money than it should.
Remember to use CCTV to check the pipes before using hydro jetting. If you can’t do it yourself, you can call us to help you with that.
b. It’s not a one-man job
Sadly, hydro jetting is not something you can execute alone. Plumbers with expertise will always check the pipes before performing hydro jetting. There are two reasons behind this:
They want to make sure that there are indeed clogs instead of the pipe collapsing.
To check if the pipes are adequate for hydro jetting.
If you see any plumber proceeding to start hydro jetting without examining your plumbing, don’t hire him.
c. Water, water, and water
This is one of the things you should remember about hydro jetting as it uses a lot of water. If you run into circumstances where you must be careful with water usage like drought, the technology won’t do you any good.
When to use hydro jetting
Considering the factors above, you should only utilize hydro jetting as the last resort. When all solutions such as drain snakes, plungers, and some mixtures fail, hydro jetting will come into play. The clogs that are immune to common plumbing countermeasures are to be hydro-jetted.
With that said, annual hydro jetting should be in order. In restaurants or hotels kitchen where grease marks are usual, you want to keep your pipes clean by hydro jetting them.
You can also apply some of the hotel plumbing tips to prevent stubborn clogs. If you find them hard to perform or follow, you can contact us for cost-efficient plumbing advice and services.